Supermicro Supero X9SCi-LN4 User Manual page 19

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F Headers/Connectors
Connector
B1
COM1, COM2
BIOS
Fans 1~4, Fan A
JF1
JL1
JLED1
JPW1
JPW2
KB, Mouse
LAN1/LAN2/LAN3/LAN4
IPMI LAN
SATA 0/1
SATA 2~5
JPI C
2
JSPK
JTPM
JWF1
JWOL
SPKR1
T-SGPIO-1/2
USB0/1
USB2/3, USB4/5,
USB 12/13
VGA
NIC LED3, NIC LED4
DIMM 1A, 2A, 1B, 2B
SW1
Slot 1~3
Slot 4~5
Slot 6
Description
Onboard Battery
COM1 Backpanel Serial Port, COM2 Serial Port Header
SPI BIOS
System/CPU Fan Headers
Front Panel Control Header
Chassis Intrusion Header
Power LED Indicator Header
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU power Connector (Required)
Keyboard/Mouse Connectors
Gigabit (RJ45) Ports (LAN3/LAN4 is supported on the X9SCi-LN4 only)
IPMI LAN (X9SCA-F/X8SCi-LN4F models only)
Serial ATA 3.0 Ports 0/1 (6Mb/s)
Serial ATA 2.0 Ports 2~5 (3Mb/s)
PWR supply (I C) System Management Bus
2
Speaker Header (Pins 3/4: Internal, 1~4:External)
Trusted Platform Module (TPM) Header
SATA DOM (Disk On Module) Power Connector
Wake On LAN Header
Internal Speaker/Buzzer
Serial Link General Purpose I/O 1/2 Headers (5V Gen1/Gen 2)
Backpanel USB 0/1
Front Accessible USB Connections (via 3 Headers)
Onboard Video Port
LED Headers for LAN3 and LAN4 (X9SCi-LN4 Only)
1066/1333 DDR3 DIMM Slots (ECC, Unbuffered type is required)
Unit ID Switch to turn on UID LED (LE5)
33MHz PCI Slots (Slot 2/3 are not available on the X9SCi series)
PCI-Express Slots x4 in x8 (Not available on the X9SCi series)
PCI-Express Slot x16
1-7
Chapter 1: Introduction