Exit Options; Save Changes And Exit; Discard Changes And Exit; Discard Changes - Supermicro Supero X9SCi-LN4 User Manual

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F User Manual
4-8

Exit Options

Main Advanced Event Logs

Save Changes and Exit

Discard Changes and Exit

Discard Changes

Restore Defaults

Save as User Defaults
Restore User Defaults
Boot Override
Built-in EFI Shell
Select the Exit tab from the BIOS Setup Utility screen to enter the Exit BIOS Setup
screen.
Save Changes and Exit
When you have completed the system configuration changes, select this option
to leave the BIOS Setup Utility and reboot the computer, so the new system con-
figuration parameters can take effect. Select Save Changes and Exit from the Exit
menu and press <Enter>.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes
to the system configuration, and reboot the computer. Select Discard Changes and
Exit from the Exit menu and press <Enter>.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the
AMI BIOS Utility Program.
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for
maximum performance.
BIOS SETUP UTILTY
IPMI Boot Security
Version x.xx.xxxx. Copyright (C) 2010 American Megatrends, Inc.
Exit
4-20
Exit system setup after
saving the changes.
 : Select Screen
 : Select Item
Enter: Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit