Start Options - Honeywell Dolphin 9900 User Manual

6. Save the file and transport it to the terminal.
Copying a File
If you want to copy a file and move it to another location, use AutoInstall and the /copy command line
argument. For details, see
Sample Autorun Configuration File
A sample Autorun.exm file installs on the workstation to C:\Program Files\Honeywell\Power
Tools and Demos for WM 6.0\EZConfig EXM Files.
For more information, see

Start Options

Start Options define the required system parameters for a software application to launch. The following
values can be entered for the StartOption key, wherever it appears:
Option Name The program launches if ...
DISABLED Never, regardless of other startup options specified.
COLDBOOT The terminal has performed a cold boot.
WARMBOOT The terminal has performed a warm boot.
TOUCH The terminal has a touch screen display installed.
NONTOUCH The terminal doesn't have a touch screen display installed.
BATCH The terminal is a batch unit (no RF or internal modem cards installed).
RF The terminal has an RF card installed (e.g., Cisco 802.11b).
GSM The terminal has a GSM radio.
BT The terminal has a Bluetooth radio.
MODEM The terminal has an internal modem card installed.
IMAGER The terminal has an imager installed.
LASER The terminal has a laser scanner installed.
BLIND The terminal has no laser or imager installed.
ANYSCAN The terminal has either an imager or a laser scanner installed.
4 - 4
Command Line Arguments
Sample EXM Files on page
Rev A
8/6/08
on page 4-10.
2-2.
Dolphin® Power Tools User's Guide
Category
None
Boot type
Touch Screen
Mobility
Scanner