Honeywell Dolphin 9900 User Manual page 92

Available Data Formatting Commands
These are the data formatting operations applied to the bar code data. The entire command string is
entered into the Format key.
Command Description
ED Check to make sure there is a non-numeric ASCII character at the current cursor
position. If character is numeric, format is aborted.
FBnnxxyy...zz Suppress all occurrences of up to 15 different characters, starting at the current cursor
position, as the cursor is advanced by other commands. When the FC command is
encountered, the suppress function is terminated. The cursor is not moved by the FB
command. nn is a count of the number of suppressed characters in the list and xxyy...zz
is the list of characters to be suppressed.
FC Disables suppress filter and clear all suppressed characters.
E4nnxx1xx2yy1 Replaces up to 15 characters in the data string with user specified characters.
Replacement continues until the E5 command is encountered. nn is the total count of
yy2...zz1zz2
both characters to be replaced plus replacement characters; xx1 defines characters to
be replaced and xx2 defines replacement characters, continuing through zz1 and zz2.
E5 Terminates character replacement.
Note: xx and ss stand for hex values of a character (00-FF), nn for a numeric count (00-99).
Code ID
Symbology Name
Australian Post
Aztec Code
Aztec Mesa Code
British Post
Canadian Post
China Post
Codabar
Codablock F
Code 11
Code 128
Code 16K
Code 32 Pharmaceutical (PARAF)
5 - 14
Code ID
A (0x41)
z (0x7A)
Z (0x5A)
B (0x42)
C (0x43)
Q (0x51)
a (0x61)
q (0x71)
h (0x68)
j (0x6A)
o (0x6F)
< (0x3C)
Rev A
8/6/08
Dolphin® Power Tools User's Guide