Autoinstall.exm - Honeywell Dolphin 9900 User Manual

AutoInstall.exm

The AutoInstall.exm file controls the behavior and appearance of the AutoInstall window and install
process.
Key Function
Version This is the current version of the AutoInstall.exm
file. This key is read-only and cannot be modified.
Debug Enable and disables logging of debug information
to \IPSM\AUTOINSTALL.LOG
Cancel Enable and disables the Cancel button on the
AutoInstall window.
FullScreen Determines if the AutoInstall window runs in full
screen mode (barring access to other windows).
HaltOnError Sets the behavior of AutoInstall when an error is
encountered.
MaskPassword If a password is entered in the Password key, this
key determines if that password is masked when
entered on the screen.
Dolphin® Power Tools User's Guide
AutoInstall
window
.
Rev A
8/6/08
Default Available Values
Value
3 N/A
0 0=Disabled
1=Enabled
0 0=Disabled
1=Enabled
1 0=Disabled
1=Enabled
2=Autoselects based
on the operating
platform.
1 0=Log the error and
continue AutoInstall
1=Halt AutoInstall and
prompt the user to
continue or cancel
1 0=Disabled
1=Enabled
4 - 9