Deviceconfig.exm Sections And Keys; Connections Section; Radio Manager Section - Honeywell Dolphin 9900 User Manual

DeviceConfig.exm Sections and Keys

The sections and keys in the DeviceConfig.exm file are locked, which means that you can change values
but not names or descriptions.
Section Name Description
Connections Configures communication parameters. There are child sections
that configure the IrDA port, the on-board radios, and the
ActiveSync connection.
System Configures basic system settings.
Applications Configures software applications.

Connections Section

The Connections section contains child sections that set communication parameters on the terminal.
Beam Section
The Beam section enables and disables the IrDA port.

Radio Manager Section

In the Radio Manager, typically, you would enable the radio in the WiFi section, enable DHCP in the
TCPIP section, then configure the radio settings in the Security\Supplicant\ProfileX or
Security\NonSupplicant section.
WiFi Section
The keys in the WiFi section control the settings of the WLAN radio.
Key Description
Enable Enables and disables the WLAN radio.
PowerMode Specifies the power save mode.
EPSParm When PowerMode is set to 3 (Auto
Enable), this parameter specifies radio
vs. battery performance.
3 - 2
Default
Value
1
1
N/A
Rev A
8/6/08
See Page
3-2
3-9
3-10
Available Values
0=Disabled
1=Enabled; if enabled, the GSM radio
section is disabled automatically
1=Disable; radio is powered
constantly (power save mode is
not used)
2=Always Enable; power save mode
is used
3=Auto Enable; EPSParm key
defines radio vs. battery
performance
X=A value between 1 and 10, where:
1=Best Radio Performance
(Minimum)
10=Best Battery Life (Maximum)
Dolphin® Power Tools User's Guide