Honeywell Dolphin 9900 User Manual page 65

MobiConrol Section
If the terminal includes the MobiControl Bootstrap Agent (/IPSM/MCBootstrapAgent.exe), then
DeviceConfig can be used to configure the terminal to connect to a MobiControl Server and download the
appropriate agent to the device.
This section is disabled by default and should only be enabled when configuring the device to connect to
the MobiControl Server for the first time.
The root level of the MobiControl section contains the main ConfigPath. By default, this is
"\IPSM\MCBootstap.ini."
Key Description
Device Subsection
NameType Mandatory
The name the device will register as on
the server.
DeviceName Mandatory when NameType is set to 2.
This is the custom name of the device.
DeviceClass Optional
The rule tag of the Add devices rule.
When the rule tag is not specificed here,
the device will use an Open, Add
devices rule.
DeviceIDType Optional
Specifies what is used for the device ID.
Info Subsection
SiteName Mandatory
This is the site name of the MobiControl
Server
Method Mandatory
The installation method.
Comm Subsection
Broadcast Optional
Enable broadcasting for discovering
server addresses.
RetryDelay Optional
Retry delay time when connection to the
server fails.
Connection Subsection
DeploySvr1 Mandatory when Broadcast key is
disabled.
This is the MobiControl Server IP
address and port.
Dolphin® Power Tools User's Guide
Default Available Value
Value
1 1=Use Device ID as the device name
2=Use custom name
N/A X=Custom name can contain
customized macros; e.g.,
"%AUTONUM%"
N/A X=The specific rule tag. Please refer
to MobiControl Help on how to
create an open rule.
3 1=HAL Old Device ID
2=HAL New Device ID
3=HAL UUID
4=User Defined
5=Server specified
6=MAC
N/A X=MobiControl Server name
1 1 (Honeywell standard)
0 0=Disable
1=Enable
30000 X=Milliseconds
N/A X=IP address:port
e.g., 192.168.1.238:5494
Rev A
8/6/08
3 - 11