Download Print this page


7600 Mobile Computer
with Windows Mobile
User's Guide


   Also See for Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600

   Related Manuals for Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600

   Summary of Contents for Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600

  • Page 1

    ® Dolphin 7600 Mobile Computer ® with Windows Mobile User’s Guide...

  • Page 2

    Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 - Agency Approvals Label Locations ........................1-1 LED Safety Statement....................1-1 FCC RF Radiation Exposure Statement ................1-1 R&TTE Compliance Statement—802.11b/g, Bluetooth, and/or GSM........1-2 Dolphin RF Terminal—802.11b/g, Bluetooth, and/or GSM ..........1-3 For European Community Users ..................1-3 Waste Electrical and Electronic Equipment Information ............1-3 Chapter 2 - Getting Started Out of the Box ........................2-1 Today Screen........................2-2...

  • Page 4

    Overview..........................4-1 29-Key Numeric Keyboard..................... 4-1 38-Key Alpha Keyboard....................4-1 Suspend/Resume ......................4-1 Function Keys ........................ 4-2 Modifier Keys ......................... 4-2 Alpha/Numeric Indicator ....................4-3 29-Key Numeric Keyboard ....................4-4 Navigation Keys......................4-4 Hardware Application Buttons ..................4-5 Toggling Between Alpha and Numeric Modes............... 4-6 29-Key Blue Key Combinations (Alpha Mode) ..............

  • Page 5

    Chapter 7 - Connecting the Terminal Connections Tab ......................... 7-1 Infrared Communication ...................... 7-2 IrDA Port Location ......................7-2 Sending Data ......................... 7-2 Receiving Data ......................7-3 Connections Manager ......................7-4 Task Tab........................7-4 Advanced Tab........................ 7-5 Dolphin Wireless Manager ....................7-6 Dolphin Wireless Manager Window................

  • Page 6

    Making the Terminal Discoverable ..................9-8 Chapter 10 - Dolphin HomeBase Device Overview..........................10-1 Front Panel ........................10-2 Back Panel ........................10-3 Power ..........................10-4 Charging the Main Battery....................10-5 Mounting..........................10-6 Bottom Panel Dimensions ....................10-7 Chapter 11 - Dolphin QuadCharger Device Overview..........................

  • Page 7: Chapter 1 - Agency Approvals

    Agency Approvals Label Locations Dolphin 7600 terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin terminal.

  • Page 8: R&tte Compliance Statement-802.11b/g, Bluetooth, And/or Gsm

    R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.

  • Page 9: Dolphin Rf Terminal-802.11b/g, Bluetooth, And/or Gsm

    Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. For European Community Users Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).

  • Page 10

    The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration.

  • Page 11: Chapter 2 - Getting Started

    Getting Started Out of the Box Verify that your carton contains the following items: • Dolphin 7600 mobile computer (the terminal) • Main battery pack (3.7v, Li-ion) • AC power supply • Localized plug adapters • User CD Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Product Service and Repair on page...

  • Page 12: Today Screen

    Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. Only tap the screen when prompted. When the boot process is complete, the Today Screen (see page 2-2) appears and the terminal is ready for use.

  • Page 13: Icons In The Navigation Bar

    Icons in the Navigation Bar Indicator Meaning The terminal could not synchronize data with the workstation via ActiveSync New e-mail or text message (SMS) New voicemail New instant message Ringer off Voice call Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress...

  • Page 14: Command Bar

    Icons in the Navigation Bar Indicator Meaning Roaming Radio is disabled The radio is not connected to a network Radio connected No radio signal The terminal is searching for a signal Radio signal strength Wi-Fi on Wi-Fi data call Pending alarm Bluetooth Command Bar Located at the bottom of the Today screen, the command bar displays running applications.

  • Page 15: Selecting Programs

    Selecting Programs Tapping Start opens the drop-down menu, which provides access to the most common system functions and programs. To open a program, tap Start > Programs. Then, tap the program icon on the menu. Using the Stylus The terminal comes with a stylus inserted into the Stylus Slot (see page 3-10), Use this stylus (or your finger) to select or enter information on the touch screen.

  • Page 16

    ® 2 - 6 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 17: Chapter 3 - Hardware Overview

    Hardware Overview Standard Configurations WPAN / WLAN / WWAN WPAN / WWAN • Windows Mobile 6 Professional • Windows Mobile 6 Professional • Samsung 2440 400 MHz • Samsung 2440 400 MHz • 128MB RAM X 128 MB (non-volatile) Memory •...

  • Page 18: Peripherals

    Peripherals The following items are sold separately and enhance the capabilities of your Dolphin terminal. Dolphin HomeBase Device ™ The Dolphin HomeBase device is a charging and communication cradle. There are two versions of this device: one that supports USB and another that supports RS-232 communication. These two options enable your terminal to interface with the majority of PC-based enterprise systems.

  • Page 19: Front Panel Features

    Front Panel Features Decode LED Scan LED 1/4 VGA Touch Screen Display (screen protector installed at the factory) Microphone Hardware Application Buttons Keyboard (29-key numeric) Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded.

  • Page 20: Touch Screen Display

    Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.

  • Page 21

    1. You will need a strong, flat, plastic card (a credit card, for example) to wedge under the existing screen protector. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 2. Press the Blue + Backlight keys to put the terminal in Suspend Mode...

  • Page 22

    4. Wipe the screen with a clean, non-abrasive, lint-free cloth. Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel. Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles.

  • Page 23

    2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is attached to the top of the touch panel. 3. Release the left edge of the releasing paper on the screen protector. 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel.

  • Page 24

    6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8.

  • Page 25

    11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal. 13. For maximum performance, recalibrate the screen. Tap Start > Settings > System tab > Screen > Align Screen. 14.

  • Page 26: Back Panel Features

    Back Panel Features Image Engine Window Accessory Attachment Stylus Slot Rear Speaker Finger Saddle SIM Card Door I/O Connector Accessory Attachment Use this button to attach accessories; see Using the Accessory Attachment on page 3-11. Finger Saddle This is a slightly depressed and angled area of the back panel that is designed to cradle or “saddle”...

  • Page 27: Using The Accessory Attachment

    Simply insert the tab into the slot until you hear a click or follow the instructions that came with the clip or accessory. Attaching the Hand Strap The accessory attachment is also how you attach the hand strap available from Honeywell. 1. Remove the accessory attachment with a Phillips head screwdriver. 2. Thread the hand strap hook underneath.

  • Page 28: Side Panel Features

    Side Panel Features DC Power Headset IrDA Port Jack Jack Side Button Access Door Side Door Note: This graphic shows the left side of the terminal. Access Door This door covers the memory card slot. To increase memory, install a memory card in this slot. ™...

  • Page 29: Installing Memory Cards

    Side Door The rubber door on the left side panel provides access to the Headset and DC power jacks. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Installing Memory Cards This terminal supports microSD and microSDHC memory cards up to 4GB.

  • Page 30

    6. Replace the access door and tighten the screw. The access door must be properly sealed before resuming terminal operation. Failure to seal the access door may cause damage not covered by the warranty. 7. Press the Backlight key to resume operation. 8.

  • Page 31: Bottom Panel Features

    Bottom Panel Features I/O Connector Hand Strap Slot Hand Strap Slot There is an adjustable, elastic hand strap available for purchase with the terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see Attaching the Hand Strap on page 3-11.

  • Page 32: Connecting The Usb Cable

    Connecting the USB Cable Connect the USB cable to the I/O connector to facilitate USB communication between the terminal and host workstation. Connector Host Workstation Cable *Power Connector Port *This is a communication-only cable until you plug the power cable into the power port. 3 - 16 Rev C Dolphin®...

  • Page 33

    Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each terminal. To charge the terminal while communicating, connect the power cable to the power port. Power Cable Power Port Dolphin®...

  • Page 34: Activesync Communication

    • Power cable from Honeywell; see Connecting the Power Cable on page 3-17. • USB cable (for USB communication) from Honeywell • Serial cable (for RS-232 communication) from Honeywell Software Requirements for Communication On the workstation: • Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0, SP6 or higher), Windows XP, or Windows Vista operating systems.

  • Page 35

    Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For USB communication, check For RS-232 communication, Allow USB connections. connect to COM1. Note: You can have both USB and RS-232 selected in the software without impacting processing. However, your hardware setup should use only RS-232 or USB, not both.

  • Page 36

    The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive. 3 - 20 Rev C Dolphin®...

  • Page 37: Battery Power

    Battery Power Dolphin terminals feature intelligent battery technology with two types of battery power: • The main battery pack on the back panel (see Main Battery Pack on page 3-21) • The backup battery located inside the terminal (see Internal Backup Battery on page 3-24) Both batteries work together to prevent data loss when the terminal is used over long periods of time.

  • Page 38

    • Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge. • If you are not sure the battery or charger is working properly, please send it to Honeywell International or an authorized service center for inspection.

  • Page 39

    These changes will not persist through a cold boot. To ensure that these settings persist through cold boots, you need to use the RegBackup Power Tool. For more information about Registry Power Tools, refer to the Dolphin Power Tools User’s Guide available for download at Dolphin® 7600 Mobile Computer Rev C...

  • Page 40: Checking Battery Power

    Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes.

  • Page 41: Resetting The Terminal

    Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) after installing software applications that require a reboot, 2) after making changes to certain system settings, or 3) when the terminal fails to respond.

  • Page 42: Suspend Mode

    Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode. The terminal is programmed to go into suspend mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To Put the Terminal in Suspend Mode Press the Blue + Backlight...

  • Page 43: Chapter 4 - Using The Keyboards

    Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard 38-Key Alpha Keyboard SCAN E N D S E N D PQRS WXYZ BKSP START The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions.

  • Page 44: Function Keys

    Function Keys Function keys appear on both keyboards and perform specific functions. Name Function Toggles the keyboard backlight on and off. Backlight Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action.

  • Page 45: Alpha/numeric Indicator

    Alpha/Numeric Indicator The Navigation bar features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode. The keyboard is in shifted (uppercase) alpha mode. The keyboard is in numeric mode.

  • Page 46: 29-key Numeric Keyboard

    29-Key Numeric Keyboard Hardware Application Buttons SCAN E N D S E N D Scan Escape Navigation Keys Enter Shift Alpha Indicators PQRS WXYZ Backspace Space BKSP START Backlight Modifier Keys Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens.

  • Page 47: Hardware Application Buttons

    Hardware Application Buttons These four buttons are programmed to launch software applications when the Today Screen (see page 2-2) is on the screen. Hardware Application Buttons SCAN E N D S E N D To customize these settings, tap Start > Settings > Personal tab > Buttons Buttons Column Matching Hardware Button Buttons 1–4...

  • Page 48: Toggling Between Alpha And Numeric Modes

    Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys.

  • Page 49: 29-key Blue Key Combinations (alpha Mode)

    29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently. Character Uppercase: Double-tap SFT @ ? ! : @ ? ! : pqrs PQRS...

  • Page 50: 29-key Red Key Combinations

    Character 29-Key Red Key Combinations Special Characters Key Combination Character Red + Left Arrow Red + Right Arrow Red + BKSP Red + SP Red + . Red + P1 Red + P2 Red + P3 Red + P4 Functions Key Combination Function Red + ESC (hold)

  • Page 51

    Key Combination Function Red + 9 Red + 0 ® Dolphin 7600 Mobile Computer Rev C 4 - 9 11/17/2008 User’s Guide...

  • Page 52: 38-key Alpha Keyboard

    38-Key Alpha Keyboard Scan Navigation Keys Backspace Enter Escape Space Shift Backlight NUM Lock Key Modifier Keys Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. Numeric mode is when you type numbers with the number keys.

  • Page 53: 38-key Red Key Combinations

    38-Key Red Key Combinations Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Down Arrow Red + Up Arrow Red + Left Arrow Red + Right Arrow Red + Left Side Button Red + Right Side Button Red + A Red + F...

  • Page 54: 38-key Num Lock Mode

    38-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. Numbers Character Special Characters...

  • Page 55

    Special Functions Character Volume up Volume down ® Dolphin 7600 Mobile Computer Rev C 4 - 13 11/17/2008 User’s Guide...

  • Page 56

    ® 4 - 14 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 57: Chapter 5 - Using The Image Engine

    Using the Image Engine Overview ™ The Dolphin terminal houses a compact image engine using Adaptus Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images. *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine.

  • Page 58: Supported Bar Code Symbologies

    Supported Bar Code Symbologies Symbology Type Symbology Name Codabar ISBT 128 Code 3 of 9 Matrix 2 of 5 Code 11 Code 32 Pharmaceutical (PARAF) Plessey Code 93 PosiCode Code 128 Straight 2 of 5 IATA 1D Symbologies EAN with Add-On Straight 2 of 5 Industrial EAN with Extended Coupon Code Telepen...

  • Page 59: Activating The Engine

    • Select Scan Demo to verify decoding, or • Select Image Demo to verify imaging. For more information about Demos, refer to the Dolphin Demos User’s Guide, which is available for download from LEDs The LEDs in the center of both keyboards (for location, see...

  • Page 60

    5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Sample PDF417 Code 128 PDF417 Test Message Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance.

  • Page 61: Capturing Images

    Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image.

  • Page 62

    ® 5 - 6 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 63: Overview

    System Settings Overview Customized settings are available on the Start menu. Tap Start > Settings and settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. Personal Tab System Tab Connections Tab Description See Page Personal Customizes buttons, set SIP options, and adjust headset settings.

  • Page 64: Personal Tab

    Personal Tab To access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab. Icon Description For more information… Buttons Program the side buttons to perform specific tasks. Buttons on page 6-3. Input Customizes the SIP. Input on page 6-4.

  • Page 65: Buttons

    2. Verify the assignment by tapping the button on the keyboard. For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for download from the web at Button Assignments By default, the side buttons (for locations, see page 3-12) activate the image engine but can be programmed to launch applications or execute commands in the Buttons setting.

  • Page 66: Input

    Additional Functions The Assign a program list also contains the following commands: Command Description <Input Panel> Opens the soft input panel. <None> Nothing happens when the button is pressed. This is the default setting for the LSide and RSide buttons and means that pressing either button activates the image engine. <OK/Close>...

  • Page 67: Menus

    Menus You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just allowing access to it from the Start menu. To add programs to the Start menu, you can use •...

  • Page 68

    2. Tap and hold on the program, then tap Copy on the pop-up menu. 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. 4.

  • Page 69: System Tab

    System Tab The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab. Tap the appropriate icon to open that system setting. For details, • See About on page 6-7.

  • Page 70: Backlight

    Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. Tap Start > Settings > System tab > Backlight. There are two tabs: The Battery tab determines display backlight settings when the terminal is running on battery power. The External tab determines display backlight settings when the terminal is running on external power.

  • Page 71: Clock & Alarms

    Clock & Alarms This setting sets the system clock, which means that all scheduled items run according to this setting. The time and date need to be reset after every hard reset of the terminal so that the system clock is accurate. On the Today screen, tap the line that displays the time and date, The Clock Settings screen appears.

  • Page 72: External Gps

    You cannot change the terminal’s memory allocation in the Memory system setting. To change the memory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more details, please refer to the Honeywell Power Tools User’s Guide, which is available for download from

  • Page 73

    This tab displays the current capacity and usage statistics Storage Card Tab of the selected memory type; IPSM or Storage Card. Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory=The total MB of memory capacity of IPSM or Storage Card.

  • Page 74: Power

    Power Power system settings contains three tabs: Battery and Advanced. Battery Tab Displays the remaining charge of batteries. For more information about the terminal’s batteries, see Battery Power on page 3-21. Determines power time-outs. Advanced Tab For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power.

  • Page 75: Remove Programs

    Remove Programs Remove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) will re-install after the next hard reset.

  • Page 76

    Screen The Screen system setting contains three tabs: Alignment, Clear Type, and Text Size. Alignment Tab Orientation–The default orientation for the screen is Portrait. Select one of the Landscape options to change the screen orientation. Align Screen–You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.

  • Page 77: Wan Info

    WAN Info When the GSM radio is active, WAN Info displays useful statistics for the radio. To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 7-6). ® Dolphin 7600 Mobile Computer Rev C 6 - 15 11/17/2008 User’s Guide...

  • Page 78

    ® 6 - 16 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 79: Chapter 7 - Connecting The Terminal

    Connecting the Terminal Connections Tab The Connections system setting provides access to the terminal’s various communication options. Icon Description See Page Beam Controls whether or not the terminal can receive data via IrDA. Bluetooth Configures the Bluetooth connection. only This icon appears if a Bluetooth radio and driver is installed on the terminal.

  • Page 80: Infrared Communication

    Infrared Communication Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. The maximum data transfer speed is 115 Kbps.

  • Page 81: Receiving Data

    5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive for the terminal to receive data from other infrared devices. 1.

  • Page 82: Connections Manager

    Connections Manager The connections manager sets up various network connections to Internet Service Providers (ISPs) via external modem. To open the connections manager, tap Start > Settings > Connections tab > Connections icon Server-Assigned IP Addresses All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). Zero-Config Wi-Fi The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7600 terminals.

  • Page 83: Advanced Tab

    Proxy Server Connections If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the PC. If these settings are not on your PC or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password.

  • Page 84: Dolphin Wireless Manager

    There are three radio options: 802.11b/g, GSM/GPRS, and Bluetooth. 1. 802.11b/g The WLAN radio is configured in the Honeywell WLAN Secure Wireless Client (SWC). Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the 7600 product page at 2. GSM/GPRS...

  • Page 85: Accessing Radio Configuration Utilities

    Each of the three radios have their own configuration utilities that you can access through the Menu. For 802.11b/g Tap WLAN Settings to open the SWC and configure the radio. Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the 7600 product page at

  • Page 86: Com Port Assignment Table

    COM Port Assignment Table 7600 with Windows Mobile Professional (with GSM): COM Port Description COM0 Unused COM1 Not accessible COM2 Serial Port: RS-232 Connector on the bottom panel COM3 Not accessible COM4 IrDA: Serial Infrared (SIR) up to 115 Kbps COM5 USB Serial: Virtual USB Serial port for ActiveSync COM6...

  • Page 87: Network Cards

    Network Cards The Network Cards setting displays the network cards installed in the terminal. 1. Tap Start > Settings > Connections > Network Cards. 2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.) 3.

  • Page 88: Usb To Pc

    The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communication. Dolphin 7600 terminals default to Serial USB. Honeywell recommends using Serial USB. To change this setting, tap Start > Settings > Connections tab > USB to PC .

  • Page 89: Installing Additional Software

    Installing Additional Software Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These default programs install when your terminal first boots up. You can install additional software programs to the terminal provided that the following parameters are met: •...

  • Page 90: Adding Programs From The Internet

    2. Follow the directions on the workstation screen. The installation process includes transferring the software to the terminal via ActiveSync. If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows Mobile-based devices.

  • Page 91: Chapter 8 - Working With Gsm

    Working with GSM Overview The Dolphin 7600 can be configured with an integrated, embedded GSM/GPRS EDGE quad-band radio module for WWAN communication. Short for Global System for Mobile communications, GSM is an open, non-proprietary wireless WAN system that is constantly evolving and growing. GPRS Short for General Packet Radio Service, GPRS is a non-voice value added service that allows packet-switched data to be instantly sent and received across mobile telephone networks.

  • Page 92: Icons In The Navigation Bar

    Voice and Data Communication Dolphin terminals with integrated GSM/GPRS radios are optimized for the following two-way voice and data communications: Voice: GSM voice data ("dial-up") Data: GPRS Class 12: Data transmissions average 40-60 Kbps (available speed depends on the wireless network carrier). You can use the GSM radio for voice communication and data communication but not at the same time.

  • Page 93

    7. Place the SIM card in the base of the connector with the contacts facing down so that those contacts connect with the SIM card interface. SIM Card Guiding Arrows SIM Card Door Metal Door SIM Card Interface 8. Fold the metal door down and slide the door up to lock the SIM card in place. You will hear a click when the door is locked.

  • Page 94: Enabling The Gsm Radio

    Enabling the GSM Radio Be default, the GSM radio should be enabled after each Hard Reset (Cold Boot) (see page 3-25). Verify the status of the radio in the Dolphin Wireless Manager. 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager 2.

  • Page 95: Data Communication

    Data Communication You set up data communication via the connections manager. The carrier on the SIM card is the ISP. System Requirements • The GSM radio must be enabled; see Enabling the GSM Radio on page 8-4. • You must have an active SIM card installed; see SIM Card Installation on page 8-2.

  • Page 96

    4. Enter the APN and tap Next. 5. Enter the username and password from the account and tap Finish. 6. On the Connections window, tap Manage existing connections. The connection you just created should appear in the list on the modem tab. ®...

  • Page 97: Ending The Data Connection

    7. Tap and hold on the connection and select Connect on the popup menu. 8. The network icon in the Navigation bar indicates the GSM radio is attempting to connect 9. When the connection is complete, the network icon changes to: 10.

  • Page 98: Voice Communication

    Voice Communication You can use the Dolphin terminal as a phone via the GSM radio. Audio Modes There are two audio modes: Speakerphone and Headset. Speakerphone Use the microphone on the front panel and the speaker on the back panel to operate the GSM phone in Speakerphone mode.

  • Page 99: Accessing The Dialer Window

    Accessing the Dialer Window When the GSM radio is active, tap Start > Settings > Connections tab > Dolphin Wireless Manager, then tap Menu > Phone Settings. The Phone dialer opens. Displays the network carrier from the SIM card. Displays the most recent calls.

  • Page 100: Setup Options

    Setup Options On the Dialer window, tap Menu > Options. You can also tap Start > Settings > Personal tab > Phone when the GSM radio is enabled. The Phone Settings tab windows appear. Network Tab Phone Tab Services Tab This tab allows you to choose This tab displays the phone number This tab displays the available...

  • Page 101: Roaming

    Roaming You can select automatic or manual roaming. The Phone defaults to automatic roaming. 1. When an active SIM card is inserted in the terminal, tap Start > Settings > Personal tab > Phone . The Phone Settings window appears. 2.

  • Page 102

    ® 8 - 12 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 103: Chapter 9 - Working With The Bluetooth Radio

    Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 7-6). 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3.

  • Page 104: Connecting To Other Bluetooth Devices

    Connecting to Other Devices Bluetooth You need to perform a device discovery and then select a discovered device and connect to it. Pairing happens as part of the connection process. 1. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. Tap Start >...

  • Page 105

    4. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device.

  • Page 106: Pairing And Trusted Devices

    8. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection. Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted"...

  • Page 107: Types Of Devices And Services

    Types of Devices and Services When you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in range, which are Bluetooth devices that have been made discoverable. Device Types The types of devices in the vicinity of the radio appear in the list of discovered devices.

  • Page 108: Connecting To Bluetooth Printers

    Connecting to Bluetooth Printers 1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices. 2. Look up the Bluetooth printer’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Connections > Bluetooth > Add new device.) 4.

  • Page 109: Transferring Files

    Transferring Files 1. Tap Start > Programs > File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device;...

  • Page 110: Making The Terminal Discoverable

    Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap the Mode tab on the Bluetooth Settings window. Select Make this device visible to other devices and tap OK. ®...

  • Page 111: Chapter 10 - Dolphin Homebase Device

    Dolphin HomeBase Device Overview The Dolphin HomeBase device is a charging and communication cradle that supports full-speed USB 1.1 communication with a workstation. You can also purchase a serial RS-232 version of this base. Battery Charging A full charge of the main battery pack takes less than four hours. The intelligent battery charging system in the terminal that protects the battery from being damaged by overcharging.

  • Page 112: Front Panel

    Front Panel Terminal Well Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the terminal is properly seated in a powered base. When this light is on, the terminal is connected to the base.

  • Page 113: Back Panel

    Back Panel DC Power Jack Pivot Connector USB Port Pivot Connector This pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight out the back panel. The pivot connector stops in both the horizontal and vertical positions, with the connectors facing out the bottom panel. DC Power Jack Connect the power cable to this power jack;...

  • Page 114: Power

    ActiveSync (see ActiveSync Communication on page 3-18). Honeywell recommends that you leave the base connected to its power source at all times, so that it is always ready to use. ® 10 - 4...

  • Page 115: Charging The Main Battery

    Charging the Main Battery Battery packs achieve a full charge in less than four hours. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage. Inserting a Terminal 1.

  • Page 116: Mounting

    Mounting If you want to mount to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the base. Back Panel Dimensions .15 in. (3.85 mm.) .32 in.

  • Page 117: Bottom Panel Dimensions

    Bottom Panel Dimensions .55 in. .67 in. (14.07 mm.) (16.97 mm.) 3.73 in. (94.88 mm.) Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the base to a vertical surface. ® Dolphin 7600 Mobile Computer Rev C 10 - 7 11/17/2008...

  • Page 118

    ® 10 - 8 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 119: Chapter 11 - Dolphin Quadcharger Device

    Battery Charging on page 11-3. Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may result in damage not covered by the warranty. We recommend use of Hand Held Products Li-Ion battery packs. Use of any non-Hand Held Products battery may result in damage not covered by the warranty.

  • Page 120: Back Panel

    Back Panel Power Switch Power Supply Connector Power Supply Connector Attach the power supply to this connector. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the charger on and off. Supplying Power Use the power adapter cable that comes with the charger so that the input voltage is adjusted appropriately.

  • Page 121: Battery Charging

    Battery Charging Inserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion. To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion.

  • Page 122: Mounting

    Mounting The charger should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a mounting location: • Keep in mind that the mounting location must allow users easy access to power switch and power connector.

  • Page 123

    Bottom Panel Mounting Dimensions 11 in. (278.93 mm.) 4.78 in. (121.4 mm.) 6.17 in. (156.8 mm.) 1.42 in. 1.17 in. (36 mm.) .99 in. .13 in. (3.4 mm.) .99 in. (25.2 mm.) (29.7 mm.) (25.2 mm.) DIN Rail Dimensions .14 in. (3.6 mm.) .7 in.

  • Page 124: Troubleshooting

    The Status LED lights red and stays An error occurred during the self-diagnostic test for that particular on without a battery in the charging charging pocket. Call Honeywell Product Service and Repair (see slot.

  • Page 125: Chapter 12 - Dolphin Mobile Mount

    Dolphin Mobile Mount Overview The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile environments. We recommend use of Hand Held Products peripherals, power cables, and power adapters. Use of any non- Hand Held Products peripherals, cables, or power adapters may cause damage not covered by the warranty. Out of the Box The Dolphin Mobile Mount ships with •...

  • Page 126

    2. The latch at the top should grip the back of the image engine window slot. Image Engine Latch Window ® 12 - 2 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 127: Mounting

    Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided). ® Dolphin 7600 Mobile Computer Rev C 12 - 3 11/17/2008 User’s Guide...

  • Page 128

    Then, you attach the rest of the RAM mount. Then, fasten the RAM mount to a stable surface. ® 12 - 4 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 129: Chapter 13 - Technical Specifications

    SOTI MobiControl (remote device management) ™ PowerNet Terminal Emulation (TNVT, 3270, 5250) ™ ITScriptNet Installed Applications: Honeywell Power Tools and Demos and ITScriptNet Ready-To-Go applications CPU: Samsung 2440 400 MHz Memory: 128MB RAM X 128MB Flash Mass Storage: User-accessible microSD™/microSDHC™...

  • Page 130

    Terminal Technical Specifications Composite Codes: Aztec Mesa, Codablock F, EAN·UCC, GS1 Databar-14 OCR: OCR-A, OCR-B, OCR-US Money Font Postal Codes: Postnet and most international 4 state codes, Australian Post, British Post, Canadian Post, China Post, Japanese Post, KIX (Netherlands) Post, Korea Post, Planet Code Wireless WWAN (optional):...

  • Page 131: Dolphin Homebase Device

    Dolphin HomeBase Device Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz. (318g) Material Polycarbonate ABS blend Color Gray Mounting Two keyholes on the back panel for wall-mounting Capacity One Dolphin terminal Environmental...

  • Page 132: Dolphin Quadcharger Device

    Dolphin QuadCharger Device Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. long X 12.2 cm. wide X 3.8 cm. high) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see DIN Rail Dimensions page 11-5.

  • Page 133: Chapter 14 - Customer Support

    Customer Support Product Service and Repair Honeywell International Inc. provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product.

  • Page 134: Technical Assistance

    Telephone - China: +86 21 6361 3818 E-mail: Japan Telephone: +813 5770-6312 E-mail: Malaysia Telephone: +603-6201-7020 E-mail: Online Technical Assistance You can also access technical assistance online at ® 14 - 2 Rev C Dolphin 7600 Mobile Computer 11/17/2008 User’s Guide...

  • Page 135: Limited Warranty

    Use of any battery from a source other than Hand Held Products may result in damage not covered by the warranty. Batteries returned to Honeywell International Inc. in a reduced state may or may not be replaced under this warranty. Battery life will be greatly increased when following the battery instructions in this user’s guide.

  • Page 136: How To Extend Your Warranty

    How to Extend Your Warranty Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell International Inc., or your Authorized Reseller.

  • Page 138

    Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 ™ 76-WM-UG Rev C 11/17/2008...

This manual also for:

Dolphin 7600

Comments to this Manuals

Symbols: 0
Latest comments: