Hotkeys - Honeywell Dolphin 9900 User Manual

HotKeys

The HotKeys Power Tool activates the hardware button assignments in the Buttons setting. To start
HotKeys automatically after each hard reset, enable the HotKeys Program section of the
File (see page 4-1).
To Enable HotKeys
1. Tap Start > Power Tools. The
2. Tap the HotKeys icon once
setting are active.
3. Verify the assignment by tapping the button on the keyboard. To see button assignments, see
Buttons Setting on page
Buttons Setting
The Buttons System setting programs hardware buttons to launch applications or execute commands. To
see the hardware button assignments that HotKeys activates, open the Buttons setting.
1. After HotKeys is enabled, tap Start > Settings > Personal tab > Buttons.
Note: The buttons that appear on this window are the only buttons that can be programmed in the
Buttons setting. You cannot add hardware buttons to this window.
2. To change button assignment, tap on the name of the application in the Assignment column and
select a program or command in the Assign a program drop down list.
3. Tap OK to save.
To Disable HotKeys
Navigate to the Power Tools Main Window
OR
Select Exit on the Command Bar Menu
Dolphin® Power Tools User's Guide
Power Tools Main Window
. HotKeys is enabled and the button assignments in the Buttons
6-5.
(see page 1-2) and tap the HotKeys icon again.
(page 6-6).
Rev A
8/6/08
(see page 1-2) appears.
Autorun.exm
6 - 5