Ezconfig Editor; Installing Ezconfig On The Workstation; Sample Exm Files - Honeywell Dolphin 9900 User Manual

EZConfig Editor

EZConfig Editor creates, edits, and manages EXM files for Dolphin terminals. There is an EZConfig Editor
on the workstation and an EZConfig Editor on the terminal. In the workstation editor, EXM files are edited,
saved, then transferred to the terminal. In the terminal editor, EXM files are edited and saved right on the
terminal; see EZConfig Editor on the Terminal
EXM Files
The EXM file format is an XML format customized for Dolphin terminals that are comprised of sections
that sometimes contain child sections and keys. Keys contain the values that configure the terminal.
The EXM file format supports a multi-level, hierarchical, tree structure. The terminal reads the highest
level section first and then reads the key values in each section.
EXM files replace INI files for Power Tools and terminal configuration settings. If both an INI file and an
EXM file are present for the same application, the terminal defaults to the EXM file and a warning
message appears at startup. Remove the INI file from the terminal to avoid this warning message.
Types of Configuration Files
There are two types of configuration files in the EXM file format:
Configuration Documents Program and configure the terminal; see
Registry Documents

Installing EZConfig on the Workstation

EZConfig Editor on the terminal installs automatically as part of the Power Tools CAB file.
You must install EZConfig Editor on the workstation separately.
1. Obtain the Honeywell EZConfig Editor Setup.exe and save it to the workstation.
2. Double-tap this EXE and follow the installation guide.
3. When installation is complete, a C:\Program Files\Honeywell\EZConfig Editor folder is
created and an EZConfig icon appears on the Desktop

Sample EXM Files

After you install the new build on the workstation, default EXM files are stored in the C:\Program
Files\Honeywell\Power Tools and Demos for WM 6.0\EZConfig EXM Files folder.
2 - 2
(page 2-30).
Update and modify the registry; see
Rev A
8/6/08
Opening EXM Files
Registry Documents on page
.
Dolphin® Power Tools User's Guide
on page 2-6.
2-17.