Chapter 7 - Using The Battery Analyzer; Requirements; Recommendation - Honeywell Dolphin 9900 User Manual

7
Using the Battery Analyzer
Overview
The Battery Analyzer Power Tool helps you manage the battery installed in the Dolphin 9900 terminal.
Note: The Battery Analyzer can be used only on the Dolphin 9900 terminal.

Requirements

For the Battery Analyzer to work, you must have the following items installed on the Dolphin terminal in
the following locations:
• The BatteryAnalyzer.exe is stored in the \Program Files\Power Tools folder.
• The BatteryAnalyzer.exm is stored in the \IPSM folder.
• The Battalyzer.dll is stored in the \Windows folder.
When all of these items are installed, the Battery Analyzer icon
Window (see page 1-2).
Operating Temperature=0°—50°C
The operating temperature of the battery must be between 0°C and 50°C. If you attempt to
analyze a battery when the operating temperature is outside this range, the analyze cycle
stops. You will be notified that the analyze cycle was aborted due to temperatures below 0°C
or above 50°C. If this happens, recharge the battery.
AC Power Supply
You must have a continuous supply of AC power to the terminal and installed battery prior to
analyzing. If you attempt to analyze a battery and AC power is interrupted, the analyze process
stops. You will be notified that the analyze cycle was aborted due to AC power interruptions.
If this happens, recharge the battery.

Recommendation

Batteries should be analyzed only once every three months.
Dolphin® Power Tools User's Guide
appears on the
Rev A
8/6/08
Power Tools Main
7 - 1