Storage Conditions Specifications; Storage Condition Ratings - Intel Core i7 Extreme Edition Datasheet

6.4

Storage Conditions Specifications

Environmental storage condition limits define the temperature and relative humidity
limits to which the device is exposed to while being stored. The specified storage
conditions are for component level prior to board attach (see following notes on post
board attach limits).
Table 6-6
represent the maximum or minimum device condition beyond which damage, latent or
otherwise, may occur. The table also specifies sustained storage temperature, relative
humidity, and time-duration limits. At conditions outside sustained limits, but within
absolute maximum and minimum ratings, quality & reliability may be affected.
Table 6-6.

Storage Condition Ratings

Symbol
T
abs storage
T
sustained storage
RH
sustained storage
Time
sustained storage
Notes:
1. Storage conditions are applicable to storage environments only. In this scenario, the processor must note
receive a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect
the long-term reliability of the device. For functional operation, please refer to the processor case
temperature specifications.
2. These ratings apply to the Intel component and do not include the tray or packaging
3. Failure to adhere to this specification can affect the long-term reliability of the processor
4. Non operating storage limits post board attach: Storage condition limits for the component once attached
to the application board are not specified.
Device storage temperature qualification methods follow JESD22-A119 (low temp) and JESD22-A103 (high
temp) standards.
88
specifies absolute maximum and minimum storage temperature limits which
Parameter
The minimum/maximum device storage
temperature beyond which damage (latent
or otherwise) may occur when subjected
to for any length of time.
The minimum/maximum device storage
temperature for a sustained period of time
The maximum device storage relative
humidity for a sustained period of time
Min
-55 °C
-5 °C
60% @ 24°C
0 months
§
Thermal Specifications
Max Notes
125 °C 1, 2, 3, 4, 5
40 °C 1, 2, 3, 4, 5
1, 2, 3, 4, 5
6 months 1, 2, 3, 4, 5
Datasheet