Thermal Metrology; Thermal Test Vehicle (Ttv) Case Temperature (Tcase) Measurement Location - Intel Core i7 Extreme Edition Datasheet

Thermal Specifications
6.1.2

Thermal Metrology

The minimum and maximum TTV case temperatures (T
and Table 6-2
integrated heat spreader (IHS).
temperature measurements should be made. For detailed guidelines on temperature
measurement methodology and attaching the thermocouple, refer to the appropriate
processor Thermal and Mechanical Design Guidelines (see
Figure 6-2. Thermal Test Vehicle (TTV) Case Temperature (T
Notes:
1. Figure is not to scale and is for reference only.
2. B1: Max = 45.07 mm, Min = 44.93 mm.
3. B2: Max = 42.57 mm, Min = 42.43 mm.
4. C1: Max = 39.1 mm, Min = 38.9 mm.
5. C2: Max = 36.6 mm, Min = 36.4 mm.
6. C3: Max = 2.3 mm, Min = 2.2 mm
7. C4: Max = 2.3 mm, Min = 2.2 mm.
8. Refer to the appropriate Thermal and Mechanical Design Guide (see
thermocouple installation on the processor TTV package.
Datasheet
and are measured at the geometric top center of the thermal test vehicle
Figure 6-2
) are specified in
CASE
illustrates the location where T
Section
) Measurement Location
CASE
Section 1.2) for instructions on
Table 6-1,
CASE
1.2).
81