Alarm Setup And Alarm Activation - Honeywell HLVR4 User Manual

Overview of Navigation and Controls

Alarm Setup and Alarm Activation

38
•
Alarm Out: activate peripheral alarm device when camera mask
occurred.
•
Delay: when motion detection completes, system auto delays
detecting for a specified time. The value ranges from 10-300(Unit:
second).
•
Show Message: System pops up message in the screen to alert you
once alarm occurred. Please highlight icon to enable this function.
•
Record Channel: select the channel to record when camera mask
occurred.
•
PTZ Linkage: Click set button to set PTZ Linkage for one or all
channels.
•
Tour: Here is for you to activate tour between different cameras.
In this interface, copy/paste function is only valid for the
same type, which means you can not copy a channel setup
Note
in loss detect mode to blind detect mode.
Before operation, please make sure you have properly connected alarm
devices such as buzzer.
In the main menu, select SETTING
Figure 5-17 ALARM
ALARM.