Outlet Grouping; Security; User Interfaces And Leds; Automatic Timeout - Lantronix SecureLinx User Manual

1: Introduction
eliminating the potential of a blown fuse or circuit breaker due to excessive in-rush
current and allows circuit support for operating load capacities of 80% to 90%.

Outlet Grouping

For operations across multiple attached devices or devices with multiple or redundant
power supplies, include outlets in one or more named groups of outlets. This allows
changes to all outlets in the named group with a single command sequence.

Security

Units ship with one predefined administrative user account. The administrator can
create up to 128 user accounts, with individualized access to outlets and commands.
All accounts support username and password protection. For configurations
requiring multiple fully-privileged users, the administrator can grant administrative
privileges to other user accounts in the system.

User Interfaces and LEDs

Two types of user interfaces are available: the web browser and the command line
interface. For easy outlet recognition, assign descriptive names to both individual
outlets and outlet groups for use in control commands. For the on-site technician,
LEDs indicate individual outlet power status and cumulative power load.

Automatic Timeout

For added security, a user session automatically terminates after five minutes of
inactivity; if a user is called away unexpectedly, an unprotected channel does not
remain open indefinitely.
SecureLinx SLP Remote Power Manager 8