Administration Commands - Lantronix SecureLinx User Manual

Displaying infeed status
The Istat or Iload command displays the status of one or more infeed.
This display includes the infeed absolute and descriptive names and the Input Status
and current Load reported to the unit by the infeed.
To display status of one or more infeeds:
1. Type istat and press Enter, or
2. Type iload and press Enter.
Examples
The following command displays the infeed status:
Starting a new session
The Login command activates the Username prompt. The current session ends,
allowing a user to log in and start a new session under a different username.
To start a new session:
1. At the command prompt, type login and press Enter. The Username prompt
appears.
Ending a session
The Quit or Logout commands end a session. A session ends automatically when no
activity is detected for five minutes, or upon loss of connection.
To end a session:
1. At the command prompt, type quit and press Enter, or
2. Type logout and press Enter.

Administration Commands

Administration commands may only be issued by a user with administrative
privileges, such as the predefined administrative account or another user who has
been granted administrative privileges with the Set User Admnpriv command.
SecureLinx SLP Remote Power Manager
ID Name
.A1 DataServer_1
.A2 WebServer_1
.A3 FileServer_1
SLP: istat
Input Input
Feed ID Feed Name
.AA HQ_1_Infeed_A
3: Operations
Input Input
Status Load
On 10.5 Amps
30