Lantronix SecureLinx User Manual page 31

User Administration
Creating a user account
The Create User command creates a user account with the specified username and
password.
To create a user account:
1. At the command prompt, type create user, optionally followed by a 1-16
character username (Spaces are not allowed, and usernames are not case
sensitive). Press Enter.
2. At the Password prompt, type a password of up to 16 alphanumeric and other
typeable characters (ASCII 32 to 126 decimal). Passwords are case sensitive.
Press Enter.
3. At the Verify Password prompt, retype the password. Press Enter.
Example
The following command creates the user account JaneDoe:
For security, password characters are not displayed.
Removing a user account
The Remove User command removes a user account.
Note: You may remove the predefined user account Admn only if another
user account has been granted administrative privileges using the Set User
Access command.
To remove a user account:
1. At the command prompt, type remove user, optionally followed by a username.
Press Enter.
Changing a password
The Set User Password command changes a user's password. For security, when
you type a password, the characters are not displayed on the screen.
To change a password:
1. At the command prompt, type set user password, followed by a username
and press Enter.
2. At the Password prompt, type the new password and press Enter. Passwords
may contain up to 16 characters, and spaces are not allowed.
3. At the Verify Password prompt, retype the new password and press Enter.
Examples
The following command changes the password for the user JohnDoe:
SecureLinx SLP Remote Power Manager
SLP: create user JaneDoe<Enter>
Password: <Enter>
Verify New Password: <Enter>
3: Operations
31