Lantronix SecureLinx User Manual page 27

Examples
The following command turns the second outlet on, using the outlet's absolute name:
The following command turns on all the outlets in the group named ServerGroup_1:
Turning outlets off
The Off command turns off one or more outlets. When the command completes, a
display indicating all outlets affected and their current states will be displayed.
To turn outlets off:
1. At the command prompt, type off, followed by one or more outlet names
separated by spaces or commas, and press Enter, or
2. Type off, followed by a group name, and press Enter, or
3. Type off all and press Enter.
Examples
The following command turns off the outlet named FileServer_1:
The following command turns off all outlets:
Rebooting outlets
The Reboot command reboots one or more outlets. This operation turns the outlet(s)
off, delays for a period of 15 seconds and then turns the outlet(s) on. When the
command completes, a display indicating all outlets affected and their current states
will be displayed.
Note: It is necessary to reissue the Status command to verify that the outlets
have rebooted after 15 seconds. See
36 for more information.
To reboot one or more outlets:
1. At the command prompt, type reboot, followed by one or more outlet names
separated by spaces or commas, and press Enter, or
2. Type reboot, followed by a group name, and press Enter, or
3. Type reboot all and press Enter.
Example
The following command reboots all the outlets in the group named ServerGroup_1:
SecureLinx SLP Remote Power Manager
SLP: on .a2<Enter>
SLP: on ServerGroup_1<Enter>
SLP: off FileServer_1<Enter>
SLP: off all<Enter>
SLP: reboot ServerGroup_1<Enter>
Displaying outlet information
3: Operations
on page
27