Lantronix SecureLinx User Manual page 22

Granting or removing Environmental Monitoring viewing privileges:
1. Click on the Edit link in the Action column for the associated user.
2. On the subsequent User Edit page, select Yes or No from the Environmental
Monitoring drop-down menu and press Apply.
Adding and Deleting outlet access:
1. Click on the Outlets link in the Access column for the associated user.
2. On the subsequent User Outlets page, select or deselect outlets to be accessed
by the user and press Apply.
Adding and Deleting group access:
1. Click on the Groups link in the Access column for the associated user.
2. On the subsequent User Groups page, select or deselect group to be accessed
by the user and press Apply.
Adding and deleting serial port access:
1. Click on the Ports link in the Access column for the associated user.
2. On the subsequent User Ports page, select or deselect ports to be accessed by
the user and press Apply.
FTP
The FTP configuration page is used for setup and maintenance of all settings
required to perform an FTP firmware upload. See
information on uploading firmware.
Setting the FTP Host IP Address:
1. Enter the IP address in the Host IP Address field and press Apply.
Setting the FTP username:
1. Enter the FTP server username in the Username field, and press Apply.
Setting the FTP password:
1. Enter the FTP server password in the Password field, and press Apply.
Setting the file path:
1. Enter the path of the file to be uploaded in the Directory field, and press Apply.
Setting the filename for upload:
1. Enter the filename of the file to be uploaded in the Filename field, and press
Apply.
Testing the FTP upload configuration:
This test validates that the unit is able to contact and log onto the specified FTP
server, download the firmware file and verify that the firmware file is valid for this unit.
1. Press Test.
SecureLinx SLP Remote Power Manager
3: Operations
for more
Uploading Firmware
22