1: Introduction; Features And Benefits; Communication Access Modes; Power Distribution - Lantronix SecureLinx User Manual

1: Introduction

The Lantronix SLP Remote Power Manager family of products provides easy,
practical, and secure solutions for power distribution, power management and load-
measurement for remote equipment and branch AC circuits.
The SLP Remote Power Manager supports the elimination of unnecessary trips to
remote locations by allowing remote control of the power on/off status for distant
critical equipment, minimizing the impact of locked-up devices on mission-critical
systems.

Features and Benefits

SLP models are available in 8-outlet and 16-outlet configurations for 100-120VAC
and 208-240VAC up to 16A. See on page 59.
Models

Communication Access Modes

All models are equipped standard with a RS-232 (serial) port and a 10/100 Base-T
Ethernet port for Telnet, Secure Shell (SSH), and web browser access.

Power Distribution

Up to 16A of AC power (dependant on model) can be distributed across up to sixteen
attached devices. See on page 59 for available models.
Models

Remote Power Management

Remote control of power outlets allows individual on/off and reboot control of up to 16
devices.

Load and Environment Measurement

Load measurement eliminates guesswork by supplying the cumulative operating load
in amperes. This allows on-site technicians to maximize the equipment installed and
operated on a circuit without concern. Use of the circuit is maximized, while
effectively allowing a 10% to 20% safety margin. Remote users also may access this
information at any time from the command line or web browser interface.
Optionally, temperature and humidity sensors allow monitoring of key environmental
conditions at remote facilities.

Power-up Sequencing

When powered on, each of the power outlets power sequentially with a two-second
delay between each outlet. Power sequencing staggers the individual loads,
SecureLinx SLP Remote Power Manager 7