Table 3-2. Operations Command Summary; Table 3-3. Administrative Command Summary - Lantronix SecureLinx User Manual

When you enter a valid username and password, the command prompt SLP:
appears. If a location identifier was defined, it will be displayed before the
prompt. See
You may enter commands in any combination of uppercase and lowercase. You
must enter all command characters correctly; there are no command abbreviations.
There are two types of commands: operations and administration. A user must have
administrative privileges to use the administration commands. The following tables
list and briefly describe each command.
Command
On
Off
Reboot
Status
ILoad
Istat
Connect
Login
Logout
Quit
List Outlets
List Group
List Groups
Command
Add Grouptouser
Add Outlettogroup
Add Outlettouser
Create Group
Create User
Delete Groupfromuser
Delete Outletfromgroup
Delete Outletfromuser
List User
List Users
Remove Group
Remove User
Restart
Set FTP Filename
Set FTP Filepath
Set FTP Host
Set FTP Password
Set FTP Username
Set Gateway
Set Infeed Name
SecureLinx SLP Remote Power Manager
Creating a location description

Table 3-2. Operations Command Summary

Description
Turns one or more outlets on
Turns one or more outlets off
Reboots one or more outlets
Displays the on/off status of one or more outlets
Displays the total cumulative input load
Displays the status of the infeed
Connect to the serial port
Ends the current session and brings up the Username prompt
Ends a session
Ends a session
Lists all accessible outlets for the current user
Lists all assigned outlets for a group name
Lists all accessible groups for the current user

Table 3-3. Administrative Command Summary

Description
Grants a user access to one or more groups
Adds an outlet to a group name
Grants a user access to one or all outlets
Adds a group name
Adds a user account
Removes access to one or more groups for a user
Deletes an outlet from a group name
Removes access to one or all outlets for a user
Displays all accessible outlets/groups for a user
Displays privilege levels for all users
Deletes a group name
Deletes a user account
Performs a warm boot
Specifies the file to be uploaded via FTP
Specifies the file path for the file to be uploaded
Sets the FTP Host IP address
Sets the password for the FTP Host
Sets the username for the FTP Host
Sets the Gateway
Specifies a descriptive field for the infeed
on page 38 for more information.
3: Operations
25