Operations Commands - Lantronix SecureLinx User Manual

Command
Set Ipaddress
Set Location
Set Outlet Name
Set Outlet Wakeup
Set Subnet
Set Telnet Port
Set Telnet
Set Tower Name
Set User Access
Set User Envmon
Set User Password
Set Port Name
Set Port Speed
Show FTP
Show Infeeds
Show Network
Show Outlets
Show Ports
Show System
Show Towers
Version
To display the names of commands that you may execute:
1. At the command prompt, press Enter. A list of valid commands for the current
user appears.

Operations Commands

Operations commands manage outlet states, provide information about the unit's
environment and control session operations.
Note: Users must be granted access to affect any change in outlet state.
Turning outlets on
The On command turns on one or more outlets. When the command completes, a
display indicating all outlets affected and their current states will be displayed.
To turn outlets on:
1. At the command prompt, type on, followed by one or more outlet names
separated by spaces or commas, and press Enter, or
2. Type on, followed by a group name, and press Enter, or
3. Type on all and press Enter.
SecureLinx SLP Remote Power Manager
Description
Sets the IP address
Specifies a descriptive field for the web browser control
screen and login banner
Specifies a descriptive field for a device attached to an outlet
Sets the wakeup state for an outlet
Sets the Subnet Mask
Sets the Telnet server port number
Enables or disables Telnet access
Specifies a descriptive field for the Unit
Sets the access level for a user
Grants or removes privileges to view input and environmental
monitoring status
Changes the password for a user
Specifies a descriptive field for the serial port
Set the connection speed for the serial port
Displays FTP configuration information
Displays infeed configuration information
Display network configuration information
Displays configuration information for all outlets
Displays the serial port configuration information
Displays system configuration information
Displays unit configuration information
Displays the firmware version
3: Operations
26