Outline And Parts; Parts - SNBC BTP-R580 User Manual

3 Outline and Parts

3.1 Outline and Parts
1—Paper near end sensor adjusting lever
2 —Paper holder
3 —Platen roller
4—Middle cover
5—Bottom cover
6 — Power switch
7—Paper guide
8—Top cover
9 — Cover spanner
10—Printhead
11—Paper roll shaft
12—Printhead support plate
13 —Power connector
14 —Communicate interface
15 —Cash drawer connector
Functions of parts:
a) Paper guide
Removing the paper guide or putting it in a different slot will allow the printer to use different
paper widths listed as follows: 82.5±0.5 mm, 80.5±0.5 mm, 57.5±0.5 mm.
b) Power switch
Switching the power of the printer on or off. "O" power is turned off. "—" power is turned on.
c) Feed button
Switching on the printer while pressing the FEED button will start the printing
of the configuration table。
In normal status:
Continuous paper mode:
The printer will feed one line when pressing the FEED button for a
short time.
The printer will feed continuously when pressing the FEED button for a longer time
Marked paper mode:
The printer will feed one line when pressing the FEED button for a short time.
The printer will locate the marks when pressing the FEED button for a longer time.
In error status, the printer will have no activity when the FEED button is pressed.
d) Power Indicator
Indicating power status (ON/OFF).
- 8 -
BTP-R580 User's Manual