Outline And Parts - SNBC BTP-2002NP User Manual

3 Outline and Parts

3.1 Outline and Parts
1— Cutter cover
2— Tear off bar
3— Printer top cover
4— Power LED
5— Error LED
6— Paper feed button
7— Top cover latch
8— Power switch
9— Power connector
10— Cash drawer connector
11— Signal Interface Connector
12— Sliding blade
13— Paper near end sensor
14— Printer platen
15— Stationary blade
16— Paper guide
17— Micro-switch
18— Paper end sensor
Functions of parts:
a- Paper feed button
Paper feeding function:
In normal status, press the FEED button shortly, the printer will feed paper by one line at a
time.
Paper testing and printing configuration information:
Holding on the feed button while turning on the printer, the self-test will start with printing the
configuration information; stop holding the button as soon as the printing starts.
Then the printer will print following indication information: "Press and Release FEED key to
print characters" and "Press and Hold FEED key to configure the printer".
Press the FEED button for a short time, the printer will print a second page with a pattern
using the built-in character sets; Hold the FEED button for a long time, the printer will enter
button configuration mode.
b- Power LED
Indicate power status (ON/OFF).
BTP-2002NP
- 7 -
User's Manual