D Battery Pack; Belt Clip - Icom IC-F3260 Series Instruction Manual

D Battery pack
To attach the battery pack:
Slide the battery pack in the direction of the arrow (q) until the
battery release button makes a 'click' sound.
NOTE: Push on the bottom of the pack to make sure the
release button is firmly locked.
To remove the battery pack:
Push the battery release button in the direction of the arrow
(w), as shown below. The battery pack is then removed.
NEVER remove or attach the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the
transceiver being damaged.
Battery pack
q
w
NOTE: Keep the battery pack terminals clean. It's a good
idea to occasionally clean them.
Battery release
button
D

Belt clip

To attach the belt clip:
q Remove the battery pack if it is attached.
w Slide the belt clip in the direction of the arrow until the belt
clip locks and makes a 'click' sound.
To detach the belt clip:
q Remove the battery pack if it is attached.
w Pinch the clip (q), and slide the belt clip in the direction of
the arrow (w).
w
q
1
ACCESSORIES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2