Heat Sink - HP SpectreXT Maintenance And Service Manual

3. Remove the system board (3).
Reverse this procedure to install the system board.

Heat sink

Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
components:
a. Battery (see
b. Fan (see
c. System board (see
Bottom cover on page
Battery on page 35)
Fan on page 39)
System board on page
33), and then remove the following
62)
Component replacement procedures
Spare part number
700804-001
65