Battery - HP SpectreXT Maintenance And Service Manual

Table of Contents

Advertisement

Battery

Description
4-cell, 48-Wh, 3.27-Ah battery (Li-ion)
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Remove the battery:
1.
Detach the multimedia cable (1) from the battery. (The multimedia cable is attached to the battery
with double-sided tape.)
2.
Disconnect the battery cable (2) from the system board.
3.
Remove the four Phillips PM2.0×3.0 screws (3) that secure the battery to the top cover.
4.
Remove the battery (4) from the computer.
Reverse this procedure to install the battery.
Bottom cover on page
33).
Spare part number
697311-001
Component replacement procedures
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectrext touchsmart

Table of Contents