Table of Contents
Advertisement
Heat sink for hybrid graphics memory
Description
Heat sink for products with NVIDIA GeForce GTX 950M/960M/965M hybrid graphics
Heat sink for products with AMD Radeon hybrid graphics
Heat sink for products with NVIDIA GeForce GTX 1050/1050Ti hybrid graphics
Before removing the heat sink for hybrid graphics memory, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
Remove the heat sink for hybrid graphics memory:
1.
Remove the 6 Phillips M2.0 screws (1) securing the heat sink.
2.
Carefully lift the heat sink (2) to remove it from the system board.
Base enclosure on page
Battery on page
34).
32).
Component replacement procedures
Spare part number
856668-001
901922-001
920563-001
49
Advertisement
Table of Contents
