Touchpad - HP SpectreXT Maintenance And Service Manual

Table of Contents

Advertisement

TouchPad

Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the TouchPad:
1.
Release the ZIF connector to which the TouchPad cable is attached, and then disconnect
the TouchPad cable (1) from the TouchPad system board.
2.
Detach the TouchPad cable (2) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided tape at two locations.)
3.
Remove the seven Phillips PM2.0×3.0 screws (3) that secure the TouchPad to the top cover.
52
Chapter 4 Removal and replacement procedures
Bottom cover on page
Battery on page
35).
33).
Spare part number
701825-001

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectrext touchsmart

Table of Contents