Memory Module - HP SpectreXT Maintenance And Service Manual

Reverse this procedure to install the multimedia board.

Memory module

Description
4-GB memory module (PC3, 12800, 1600-MHz)
2-GB memory module (PC3, 12800, 1600-MHz)
Memory shield
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
result in various system problems.
To update BIOS:
1. Navigate to www.hp.com.
2. Click Support & Drivers > click Drivers & Software.
3. In the Enter a product name/number box, type the computer model information, and then
click Search.
4. Click the link for the computer model.
5. Select the operating system, and then click Next.
6. Under Step 2: Select a Download, click the BIOS link.
7. Click the link for the most recent BIOS.
8. Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the memory module:
1. Remove the Phillips PM2.0×3.0 screw (1) and the Phillips PM2.0×4.5 screw (2) that secure
the memory shield to the top cover.
60 Chapter 4 Removal and replacement procedures
Failure to update the computer to the latest BIOS prior to installing new memory may
Bottom cover on page 33).
Battery on page 35).
Spare part number
691740-001
691739-001
701817-001