Air Filter Inspection; Air Filter Cleaning - Honda FRC800 Owner's Manual

SERVICING YOUR TILLER
AIR FILTER INSPECTION
AIR
1. Unscrew the wing nut and
CLEANER
COVER
remove the air cleaner cover.
Check the air filter to be sure it
is clean and in good condition.
2. If the air filter are dirty, clean
them as described on page 34.
Replace the air filter if they are
damaged.
3. Reinstall the air cleaner cover,
and tighten the wing nut
securely.
1
NOTICE
1
Operating the engine without the air filter, or with damaged air filter,
will allow dirt to enter the engine, causing rapid engine wear. This
type of damage is not covered by the Distributor's Limited Warranty.
AIR FILTER CLEANING
A dirty air filter will restrict air flow to the carburetor, reducing engine
performance. If you operate the tiller in very dusty areas, clean the
air filter more frequently than specified in the Maintenance Schedule.
1. Remove the wing nut and air cleaner cover.
2. Remove the wing nut and grommet, and air filter elements and
separate them.
3. Carefully check both filter elements for holes or tears and replace
if necessary.
34