Transporting - Honda FRC800 Owner's Manual

TRANSPORTING
BEFORE LOADING
If the engine has been running, allow it to cool for a t least 15 minutes
before loading the tiller on the transport vehicle. A hot engine and
exhaust system can burn you and can ignite some materials.
Always turn the ignition switch to the OFF position. Make sure to
turn the fuel valve OFF.
LOADING AND UNLOADING
If a suitable loading ramp is not available, t w o people should lift the
tiller on and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie
the tiller down with rope or straps. Keep the tie-down rope or straps
away from the controls, adjustment levers, cables, and the
carburetor.
52