Maintenance Safety - Honda FRC800 Owner's Manual

SERVICING YOUR TILLER
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, w e
cannot warn you of every conceivable hazard that can arise i n
performing maintenance. Only you can decide whether or not you
should perform
a
given task.
Failure to properly follow maintenance
instructions and precautions can cause you to
be seriously hurt or killed.
Always follow the procedures and precautions
in the owner's manual.
Safety Precautions
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
-Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the
engine.
- Burns from hot parts.
Let the engine and exhaust system cool before touching.
-Injury from moving parts.
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure you have
the tools and skills required.
To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, t o clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
Disconnect the spark plug cap and wear
working near the belts, or tine blades.
heavy gloves when
26