Engine Oil - Honda FRC800 Owner's Manual

STORAGE
Engine Oil
1. Change the engine oil (page 31).
2. Remove the spark plug (page 36).
3. Pour a tablespoon (5
-
10 cc) of clean engine oil into the cylinder.
4. Pull the starter rope several times to distribute the oil in the
cylinder.
5. Reinstall the spark plug.
6. Pull the starter grip slowly until resistance is felt, and the notch on
the starter pulley aligns with the hole at the top of the recoil starter
cover.
This will close the valves, so moisture cannot enter the engine
cylinder. Return the starter rope gently.
STARTER GRIP
/
Align the notch on the
starter pulley with the hole
at the top
of
recoil starter.
50