Handling Tips - Honda FRC800 Owner's Manual

OPERATION
HANDLING TIPS
Adjust the handle bar height to a comfortable position (waist
height for normal tilling).
The drag bar should always be used when tilling. It enables you
to compensate for the hardness of the soil. The ideal height of
the drag bar will depend on the type of soil being tilled and soil
conditions a t the time of tilling. In general, however, the drag
b a r s h o u l d b e a d j u s t e d so t h a t t h e t i l l e r i s t i l t e d s l i g h t l y
backward.
If the machine jerks forward while tilling, press down on the
handle bars. This will cause the drag bar to dig more deeply
into the soil.
If tines dig in but the machine will not move forward, move the
handle bars from side to side.
Stop the tines before crossing gravel drives, walks, or roads.
Stay alert for hidden hazards or traffic.
Stop the engine immediately if the tiller vibrates abnormally.
Check the tiller for damage or loose parts, and repair or replace
them before using the tiller again. Vibration is usually a sign of
trouble.
23