Direct Operation - Travis Industries DVL GSR Owner's Manual

32

Direct Operation

The fireplace may be directly operated from the receiver. The three positions are below (see Figure 3):
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the receiver switch is turned to ON or OFF, the mode settings (Accent Light, Blower, Flame
Height, Comfort Control) will remain in the same state as before the switch was moved (i.e.: the receiver
"remembers" the last setting). If you wish to adjust the mode settings use the transmitter mode button to
adjust the settings (see "Mode Controls" on page 36). The thermostat and burner on/off operating
functions will not work on the transmitter.
© Travis Industries
Operation
ON REMOTE OFF
PRG
4091008
Figure 3
100-01236_000