Table of Contents
Advertisement
Optional Equipment (for qualified installers only)
LP Instructions
The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance to LP. The kit contains
the stepper motor (regulator), torx wrench, and pilot orifice. The burner orifices are shipped with the appliance.
Convert the appliance prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 21). Remove the logs and embers (if installed - page 23)
2
Remove the ember trays and burner (see below). Grasp the burner with both hands and lift it straight
up and out of the firebox. Remove and discard the back air shield.
3
Remove and discard the manifold cover (see below).
© Travis Industries
4091008
47
100-01236_000
- Quick Links:
- Replacement Parts List
Hide quick links:
Advertisement
Table of Contents
