32
Direct Operation
The fireplace may be operated directly from the receiver. To access the receiver, remove the face. The
three positions are shown below:
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings)
REMOTE – Burner is controlled by the transmitter.
NOTE: When the receiver switch is turned to ON or OFF, the mode settings (Lights, Blower, Flame
Height, Comfort Control) will remain in the same state as before the switch was moved (i.e. the receiver
"remembers" the previous settings). If you wish to adjust the mode settings use the transmitter mode
button to adjust the settings (see "Mode Controls" on page 27). The thermostat and burner ON/OFF
operating functions will not work on the transmitter.
© Travis Industries
Operation
4051112
ON
Remote
OFF
100-01271_000