Left Log Placement; Right Log Placement - Travis Industries DVL GSR Owner's Manual

24

Left Log Placement

The left log has a hole on the bottom. Place the log so the pin on the burner inserts into the hole on
the log (see photos below). Position the log so the right side straddles the burner holes. The log
must not cover any burner holes.

Right Log Placement

The right log has a hole on the bottom. Place the log so the pin on the bracket inserts into the hole
on the log (see photos below). Make sure the log is pushed back so it sits flat against both sides of
the bracket attached to the burner.
© Travis Industries
Finalizing the Installation
4091008 100-01236_000