Overview
The baffle is shipped outside the DVL insert to allow for the ceramic logs to be shipped inside the firebox. Attach
the baffle before installing the insert.
Baffle Installation
1
Remove the glass
2
Remove the two screws directly above the firebox opening (see the illustration below).
3
Place the baffle inside the firebox so the bend on the back of the baffle inserts into the joggle clip.
4
Replace the two screws to secure the front of the baffle.
Page 1 of 1
DVL Insert Baffle for Australian Units
Baffle
5/2/08
Joggle Clip
© Travis Industries, Inc.