Table of Contents
Advertisement
Quick Links
Compatibility
DVS GSR NB Insert
DVS GS (AU) Inbuilt
Packing List
DVS Ember-Fyre Burner Assembly
Left and Right Ember Trays
8-Piece Log Set
Bag of Rock Wool
Bag of Log Embers
Burner Installation
1. Access the firebox.
2. Install the burner as shown below (make sure the burner is fully seated over the orifices and pushed
all the way to the right). Install the side ember trays.
Page 1 of 6
DVS GSR Ember-Fyre Burner
Installation Instructions
17601693.docx — 7/12/12
(SKU 96900102)
© Travis Industries, Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Travis Industries DVS GSR Ember-Fyre
Summary of Contents for Travis Industries DVS GSR Ember-Fyre
-
Page 1: Installation Instructions
DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Compatibility DVS GSR NB Insert DVS GS (AU) Inbuilt Packing List DVS Ember-Fyre Burner Assembly Left and Right Ember Trays 8-Piece Log Set Bag of Rock Wool ... - Page 2 DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Log Set Installation The logs are fragile, especially after being exposed to heat. Make sure the gas control valve is “OFF” and the heater is cool prior to conducting service. ...
- Page 3 DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Left Log Placement The left log has two holes on the bottom. Place the log so the pin on the burner and the metal bracket insert into the holes on the log (see photos below).
- Page 4 DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Right Twig Placement The right twig has a single hole in the bottom that fits over the right pin on the back log (see photos below). The lower side of the twig rests on the right log. Place the twig as shown below.
- Page 5 DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Front Ember Chunk Placement This log set includes left, right, and center ember chunks (see photo below). Left Ember Chunk Right Ember Chunk Center Ember Chunk Place the ember chunks as shown in the photos below. Make sure the ember chunks do not cover any burner holes.
- Page 6 DVS GSR Ember-Fyre Burner Installation Instructions (SKU 96900102) Rockwool Installation The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock wool works best when it is applied in a very thin, porous layer. The best method for applying the rock wool is to brush it on to the burner.
Need help?
Do you have a question about the DVS GSR Ember-Fyre and is the answer not in the manual?
Questions and answers