Automatic Dialing - Avaya 4610SW User Manual

!
Important:
If your administrator has set up a dialing plan structure, the telephone recognizes
Important:
completion of dialing and automatically proceeds with the connection. In other
cases, and when dialing a URI, you might need to press the Send softkey to
direct the telephone to proceed with the connection.
If the "Phone Screen on Calling" option is set to "Yes," the Phone screen redisplays. The
active session appearance line displays the number or URI entered and the telephone
starts the call.
3. To end the call, hang up the handset, deactivate the headset, press the Speaker button or
Drop (

Automatic Dialing

Automatic dialing includes:
redialing a previously called number or URI,
●
speed dialing a number or URI programmed on a Speed Dial button,
●
dialing a party listed on your Call Log, or
●
dialing a party from a Web page.
●
Note:
The 4610SW SIP IP Telephone often receives telephone numbers or URIs
Note:
through the Call Log or Web Access Application that are not immediately
"dialable." For example, the Call Log might contain an incoming call from the
following U.S. telephone number: 732-555-1234. Usually, if you try to dial that
number as is, the call cannot go through. You must dial one or more digits for an
outside line, access your corporate telephone network, or add some other code
to return the call. The 4610SW SIP IP Telephone can, if appropriately
administered, automatically dial those "extra" digits for you. So, with one touch,
the telephone automatically dials 91-732-555-1234. Your Telephone
Administrator has information on setting up this Enhanced Dialing capability.
If all lines are in use, automatic dialing does not work.
) button.
Making Calls
Issue 2.2 August 2005 25