Redialing A Party - Avaya 4610SW User Manual

Using Your 4610SW SIP IP Telephone

Redialing a party

Depending on your Redial option setting, selecting Redial either:
automatically dials the most recent number or URI dialed, or
●
brings up a list of the last three outgoing calls for selection of the number to be dialed.
●
Chapter 6: 4610SW SIP IP Telephone Options
procedures follow.
Note:
Your Telephone Administrator can turn off the Redial feature, or can restrict your
Note:
telephone to dial only the last number dialed. If the Redial feature is turned off,
pressing the Redial button generates an error tone. If the Redial feature is
restricted to only the last number dialed, follow the instructions for redialing the
last number called.
Redialing the last number called:
Press the Redial (
The last number or URI dialed is automatically redialed.
Redialing using a list of the last three numbers called:
1. Press the Redial (
The Redial screen displays the last three unique numbers or URIs dialed and the prompt
"Select number to dial." appears on the top display line.
2. Press the Line/Feature button associated with the number you want to redial.
If the call can be dialed, the telephone displays the Phone screen. The selected number
dials automatically.
If the selected number cannot be dialed, for example, if all call appearance lines are
currently on Hold, all Redial entries are disabled. If you press a number for redialing while in
this state, an error beep tone sounds and no further action occurs.
3. Proceed with the call.
A Call Log entry is created for this call.
26 4610SW SIP IP Telephone Release 2.2 User Guide
covers setting the Redial feature. Both redial
) Feature button.
) Feature button.