Setting A User Id, Password, And Other File Transfer Protocol Options - Avaya 4610SW User Manual

Setting a User ID, Password, and Other
File Transfer Protocol Options
Your System Administrator establishes certain parameters for each 4610SW SIP IP Telephone
in your network. Most parameters are established at the network server and apply to all
telephones in the network. Other parameters can be unique to a specific site, department, or
group of telephones. Those settings which can be unique to your telephone appear on the FTP
Setup screen. They are:
Server IP Address - the specific server to which your 4610SW SIP IP Telephone is
●
connected for backup, restore, and other network-related functions. If your telephone was
repaired, this value was set to zero and must be reestablished.
Directory Path - the server location to which your telephone data is sent during a backup
●
and from which data is restored.
User ID and Password - unique identifiers assigned to a telephone user for server
●
security purposes.
Note:
All FTP settings are set to blank on telephone manufacture and repair.
Note:
Because FTP information can impact server operation and the proper backup of
your telephone data, contact your System Administrator before updating any
settings.
The user ID and password in the following procedure provide access to your
server. With server access, you can perform backup and other (future)
server-related features. This user ID/ password is not the Avaya Communication
Manager registration ID and password. The Avaya Communication Manager
registration ID and password identify you as an authorized user of your
respective system.
1. To update any of the FTP settings, select FTP Setup from the Backup/Restore Main screen.
The telephone displays the first FTP Settings Main screen.
Backup/Restore Options
Issue 2.2 August 2005 75