Temporary Memory - NEC SV-8100 User Manual

CONFERENCE
1. Establish first intercom or trunk call. (display shows).
21 OCT THU 12:34PM
CONF RPT
2. Press Conf softkey (display shows).
21 OCT THU 12:34PM
AnHd Dir
3. Dial the extension you want to add. - OR -
Access outside call by dialing 9 - OR – press "DIR" to access
the directory. (AnHd – returns you to call 1)
4. When second party answers (display shows), press Add to
add this call or Rls to end second call.
21 OCT THU 12:34PM
Add Rls
5. After Add has been pressed display shows.
21 OCT THU 12:34PM
Begin Add
6. When you are ready to being the conference press Begin
softkey. Press Add to continue adding to the conference call.
NOTE: Unless a conference bridge has been installed, A
conference call can consist of three parties. Two parties within
your office and one outside caller or Two outside callers and
one inside extension.
SAVE TRF
12
CALLER ID
Answer
Receive incoming ringing or transferred outside call:
1. Review the telephone display for the calling party's name or
number.
2. Answer the call accordingly.

Temporary Memory

An unanswered call will cause the Call History key to flash (a
handset icon in the upper left hand corner of the display),
indicating a new call has been placed in the temporary
memory.
Press the center button of the joystick. The display will change
to:
[1] MISSED CALLS
[2] VOICE MAIL
Dial 1 for Missed calls.
21 OCT THU 12:34PM
2174423800
UP DN
Use up and down arrows to scroll through the log.
To place a call back to a number in the temporary memory list,
with the number to be dialed displayed, lift the handset or
press the Speaker key.
To delete, press Delete key and follow the softkeys.
21 OCT THU 12:34PM
2174423800
DIGITALCOMM
Delete Save
DIGITALCOMM
One All
17