Ip Configuration; General Settings - Moxa Technologies AWK Series User Manual

IP Configuration

The IP Configuration section is used to configure the device's basic IP configuration. Click IP
Configuration in the function tree.

General Settings

The General tab lets you configure the device's basic network information. Click the General tab to access
this screen.
Configure the following settings.
IP Mode
Setting
DHCP
Static
IP Address
Setting
IP address
Subnet mask
Setting
Subnet mask
Default Gateway
Setting
IP address
DNS Server 1 and DNS Server 2
Setting
IP address
When finished, click APPLY.
AWK Series User Manual
Description
The AWK is assigned an IP address automatically by the
network's DHCP server.
Manually configure up the AWK's IP address.
Description
Enter the AWK's IP address.
Description
Select the subnet mask. This is used to identify the type of
network the AWK is connected to (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class C network).
Description
Enter the IP address of the router that connects the LAN to an
outside network.
Description
Enter the primary and secondary DNS server address. After
entering the DNS server's IP address, you can input the AWK's
URL (e.g., http://ap11.abc.com) in your browser's address
field instead of entering the IP address. The Secondary DNS
server will be used if the Primary DNS server fails to connect.
Factory Default
Static
Factory Default
192.168.127.253
Factory Default
24 (255.255.255.0)
Factory Default
None
Factory Default
None
88