Chapter 5 Initial Ip Address Configuration - Moxa Technologies NE-4100 User Manual

Initial IP Address Configuration
Chapter 5
When setting up your NE-4100 Series module for the first time, the first thing you should do is
configure the IP address. This chapter introduces the methods that can be used to configure the
NE-4100 Series module's IP address. For more details about network settings, see the Network
Settings section from Chapter 6, Web Console Configuration.
This chapter includes the following sections:
Initializing NE-4100 Series Module's IP Address
!
Factory Default IP Address
!
NE-4100 Series Administration Suite $ recommended configuration method
!
ARP
!
Telnet Console
!
Serial Console (19200, n, 8, 1)
!
5
5