The ioMirror supports an optional detachable LCD display kit, also known as the LCM, for easier
field maintenance. The LCD display kit is hot-pluggable and can be used to configure the network
settings or display other settings.
Controls
The up and down buttons navigate between the current options. The right and left buttons enter and
exit the submenus. The center button is used when modifying settings or restarting the server.
Button
Up
Down
Left
Right
Center
An "e" in the upper right hand corner of the display indicates that the parameter can be modified.
Press the center button to modify that parameter's settings.
Menu Options
Display
<ioMirror E3210>
server
<ioMirror E3210>
network
<ioMirror E3210>
mirror
Function
go to the previous item
go to the next item
exit the current submenu and return to the previous menu (go up one level)
enter the selected submenu (go down one level)
enter/exit editing mode
Explanation / Actions
This is the default screen. Enter this submenu to display information
about the specific server you are viewing::
serial number
name
location
e3210 f/w ver
lcm f/w ver
model name
Enter this submenu to display information and settings for the network:
ethernet link
mac Address
p mode: Static, DHCP, DHCP/Bootp, Bootp
i
ip Address: 192.168.127.254
netmask: 255.255.255.0
gateway: 0.0.0.0
dns Server
-1: 255.255.255.255
dns Server
-2: 255.255.255.255
Enter this submenu to view and set the IP address of the remote output
module. This is only for ioMirrors that are operating in Module-to-
Module mode:
M _ M IP
LCD Display Kit
Appendix A
A
A