Table of Contents
Advertisement
ioMirror E3210 User's Manual
Welcome
The ioMirror E3210 is a cable-replacement solution that connects digital input signals to digital
outputs over an IP network. It is equipped with 8 digital inputs, 8 digital outputs, and a
10/100Mbps Ethernet interface. A pair of ioMirror servers can connect remote sensor signals to a
PLC controller, DCS systems, or a display device over Ethernet, eliminating the need to install
additional signal wires. Up to 8 digital input signals can be connected from one ioMirror to another
with only 20 ms signal latency over a local area network.
Industrial Business Automation Applications
The ioMirror is a fast and easy way to connect input and output signals over IP networks. It is ideal
for non-mission critical applications such as remote monitoring. Maximum transmission distance
can be achieved without programming and without a separate controller. Potential applications
include the following:
Remote signal display
Signal splitting
System monitoring
Tank level, pump, and valve control/monitoring
Power station signal monitoring
Telecom machine room monitoring
Security signal display for factory, office or public building
1-2
Introduction
Advertisement
Table of Contents
