Info And Settings Menu - MakerBot Replicator 2X User Manual

INFO AND SETTINGS MENU

34
THE INFO AND SETTINGS MENU
The Info and Settings menu displays
information about your MakerBot Replicator
2X and allows you to change settings on
your MakerBot Replicator 2X. [Fig. 4.3]
Bot Statistics. This entry displays the total
Fig. 4. 3
build time, in hours and minutes, during
the lifetime of your MakerBot Replicator
2X. It also displays the duration of the last
completed build.
General Settings. This entry leads to a
sub-menu that allows you to change settings
on your MakerBot Replicator 2X. [Fig. 4.4]
Fig. 4. 4
To navigate the entries under General Settings:
• Use the up and down arrows to navigate
to the setting you want to change.
• Use the M button to select the setting you
want to change.
• Use the up and down arrows to scroll
through the available options for each setting.
• Use the M button to select and confirm
your change to a setting.
Sound. This entry toggles the indicator sounds
ON and OFF. Setting this entry to OFF stops
the MakerBot Replicator 2X from beeping
when you turn it on or when a print finishes.
However, this option will not eliminate all
sound made by your Replicator 2X. The
sounds you hear during printing come from the
stepper motors and cannot be turned off.
LED Color. This entry allows you to change
the color of the LEDs in the frame of the
MakerBot Replicator 2X. The LEDs can be set
to WHITE, RED, ORANGE, PINK, GREEN, BLUE
or PURPLE, or turned OFF.